What To Do If Your Bidet Is Not Flushing

If your bidet seat is not flushing, the problem may be a result of one of the following. Check to ensure all of these points are operational:
• There are no kinks in the water supply hose.
• The water valve is turned on.
• The water supply is properly connected.


What To Do If Your Bidet Is Flushing Poorly

If your bidet seat is flushing, but poorly, the problem may be a result of one of the following. Check to ensure all of these points are operational:
• There are no kinks in the water supply hose.
• The water valve is turned on fully.
• The filter is not clogged or in need of cleaning.


What To Do If Your Bidet’s Water Or Seat Is Not Warming

If your bidet’s water or seat is not warming properly, there may be a few potential causes. First, check to see if the temperature is set to low and adjust accordingly. If the temperature is set appropriately, make sure the seat is not in power save mode. If it is, switch the seat to function mode.


What To Do If Your Bidet’s Dryer Is Not Releasing Air Or Warming

If your bidet is not releasing air from its dryer—or if the air it is expelling is not warm—there are a few quick-fix solutions. First, check to see if the temperature is set to low and adjust accordingly. If the temperature is set appropriately, make sure the dryer is not in power save mode. If it is, switch the dryer to function mode.

 

What To Do If Your Bidet’s Nozzle Is Not Retracting

If your bidet’s nozzle is not retracting, there are a few quick solutions:
• Check to see if the seat is on
• Make sure nothing is interfering with the nozzle. If there is, remove any obstructions.


What To Do If Your Bidet’s Nozzle Is Not Extending

If the bidet nozzle is not extending, check to make sure the seat is turned on. However, if it is on, the sensor may not be detecting use. Oftentimes, simply adjusting your position while using the bidet will trigger the sensor.


Controller Not Working

If your controller is not working, make sure all of the batteries are operational and replace them if necessary.

Was this article helpful?
0 out of 0 found this helpful